Download REPAIR PROCEDURE Raise the vehicle on a hoist. Drain the transmission. Refill it with Genuine HondaATF Z1. Start the engine. With your foot on the brake pedal, shift thetransmission to D45. Release the brake pedal. Press on the accelerator,and bring the speedometer up to 50 mph. Makesure the transmission shifts through the first threelower gears and into fourth, and that the torqueconverter locks up. Apply the brakes to stop the front wheels. Shift to reverse, and then to neutral. Repeat the shifting procedure (steps 4 through 7)four more times. Turn off the engine. Repeat the above drain, refill, and shiftingprocedure (steps 2 through 9) two more times. Drain the transmission. Reinstall the drain bolt witha new washer. Refill the transmission with GenuineHonda ATF Z1. Disconnect the linear solenoid electrical connector.Remove the mounting bolts, then remove the linearsolenoid.